E-Liquid

Subscribe to E-Liquid
Photo of Azim ChowdhuryPhoto of Daniel RubensteinPhoto of Benjamin Wolf
inspection_cartoon

In a widely anticipated move, FDA has significantly increased the frequency of inspections of vapor manufacturing and retail facilities over the past few weeks, with some inspections spanning two days. We have received reports from vapor businesses across the country that they are receiving unannounced visits from FDA investigators conducting biannual inspections pursuant to Sections 704 and 905 of the Food, Drug, and Cosmetic Act as amended by the Tobacco Control Act. Under the Act, FDA is required to inspect every tobacco manufacturing facility at least once every two years. FDA uses a broad definition of manufacturing – repacking and relabeling are considered manufacturing acts and retailers that mix e-liquids for consumer sale are considered manufacturers.

During the course of their inspection, FDA investigators have requested product samples, labeling and invoices for raw materials, and labeling and invoices for finished goods. We understand that inspections have included both production (cleanroom) and non-production areas and have made use of photography and recordings. FDA appears also to be doing a lot of “fact finding” – learning as much as they can about the industry and how these products are manufactured and distributed, potentially for use in the development of future guidance documents and rulemakings.

We have also received reports of inspectors visiting vapor businesses from other agencies, including the Federal Aviation Administration (FAA), federal and state Environmental Protection Agencies (EPA), as well as state inspectors (e.g., California Department of Tax and Fee Administration).

As FDA continues to visit facilities across the country, it is critical that manufacturers, including retailer-manufacturers, understand the types of information that they are required to provide to the Agency upon request, as well as the type of that information that can or should be withheld. Similarly, Companies should understand the scope of authority that an FDA Investigator has in asking for specific product details. Vapor product manufacturers should fully prepare for their impending inspection now, so that they can demonstrate a high-degree of confidence when FDA arrives. Critically, and as third-party consultants begin to enter the Good Manufacturing Practice (GMP) space, manufacturers and retailer-manufacturers should ensure that the guidance they receive from outside counsel is accurate and based on experience in sound science and law and is protected from disclosure to FDA by attorney-client privilege.

Audit and Inspection Program Completes Coast-to-Coast Site Visits in First Half of 2018

Keller and Heckman’s Audit and Inspection Program (AIP) provides companies that are involved in any aspect of the tobacco or vapor product supply chain with assurance that their facilities are operating in accordance with FDA requirements. AIP Program attorneys have completed audits from Florida to California since the Program first began in early 2018, and feedback has been overwhelmingly positive:

Having your team run a thorough inspection was extremely helpful in preparing us for a “real” FDA inspection. The knowledge and insight you guys were able to provide my “Team Awesome” will certainly help us navigate through the regulations and future inspections. During this interesting time for the industry, and as a responsible manufacturer, we must do everything possible to ensure we are going above and beyond what potential GMP’s may be down the road to keep consumers and the industry’s reputation safe.

As “cool” as some people think it is to be a manufacturer in the vape industry, it’s not to be taken lightly. We try to do everything possible to provide our consumers and retailers with top quality products that are manufactured in a clean and safe environment. Having your team come in to review our facility and manufacturing practices gives us confidence that we are doing exactly what we have set out to accomplish!

The AIP Program includes both audit and training components from attorneys experienced in tobacco and vapor law, inspections, and good manufacturing practices, and addresses a broad range of inspection activities, including: recordkeeping, product labeling, product samples, requests for video/audio/photographic recordings, standard operating procedures, cleanliness and sanitation, inventory control, and personnel interviews.

Audits by the AIP Program staff are covered by attorney-client privilege and attorney work-product privilege.

Pre-registration for the AIP is available immediately by filling out the form available here:

Tobacco and Vapor Product Manufacturing Establishment Audit and Mock Inspection Program Pre-Registration Form

The completed pre-registration form can be E-mailed to chowdhury@khlaw.com, faxed to (202) 434-4646, or mailed to:

Keller and Heckman LLP
Attn: Azim Chowdhury
1001 G Street NW, Suite 500 West
Washington, D.C. 20001

Space is limited, and scheduling is generally available on a first-come, first-serve basis.

Photo of Azim Chowdhury
harm_minimization

On June 18, 2018, U.S. Food and Drug Administration (FDA) Commissioner Dr. Scott Gottlieb delivered remarks on “FDA’s Nicotine and Tobacco Regulation and the Key Role of Regulatory Science” at the Tobacco Regulatory Science Program Meeting.[1] While addressing the importance of regulatory science to inform FDA’s Center for Tobacco Products (CTP) regulatory efforts, Commissioner Gottlieb focused a portion of his remarks on the use of Electronic Nicotine Delivery Systems (ENDS) as tobacco harm reduction or smoking cessation tools and FDA’s role in their regulation.

“Preservation of E-Cigarettes”

According to Commissioner Gottlieb, utilizing scientific evidence and supporting new research to inform tobacco regulatory actions that protect public health is one of the primary missions of FDA’s CTP. Utilizing regulatory science to better understand e-cigarettes, Commissioner Gottlieb confirmed again that not all tobacco products are equally harmful, but that a “continuum of risk” exists, stating, “[w]e believe in the concept of a continuum of risk related to tobacco products, and we believe there is a role for modified risk products. Further, we want to preserve e-cigs as one among a number of possible options for adult smokers and believe that fully transitioning smokers to ENDS can reduce the morbidity and mortality associated with tobacco use.” Preservation of e-cigs as a possible option for adult smokers entails better understanding “the potential benefits of electronic nicotine products as smoking cessation tools.”

In his remarks, the Commissioner highlighted a recent report by the National Academies of Sciences (NAS), entitled “Public Health Consequences of E-Cigarettes.” You can read a summary of that report in a previous blog post here. Commissioned by FDA, the report makes clear, among other things, the reduced harm of e-cigarettes compared to smoking cigarettes and that completely switching from regular use of combustible cigarettes to e-cigarettes results in reduced short-term adverse health outcomes in several organ systems.[2]

Acknowledging those findings, Commissioner Gottlieb noted, “[p]otentially less harmful products – including the wide diversity of ENDS and other novel tobacco products – must be put through an appropriate series of regulatory gates to fully evaluate their risks and maximize their potential benefits.”

The Commissioner’s praise of vapor products as a potential reduced harm alternative for smokers, however, apparently does not apply to adolescents, for whom FDA maintains there is never a good reason to use any tobacco product, reduced harm or not – a position that has been criticized in some public health circles.

“Appropriate Series of Regulatory Gates” in the Context of the Deeming Rule Appeal

The Commissioner’s remarks on e-cigarettes were delivered in the midst of a lawsuit filed by Nicopure Labs, LLC and the Right to be Smoke-Free Coalition (appellants) challenging aspects of the Tobacco Control Act (TCA) and FDA’s Deeming Rule now pending before the U.S. Court of Appeals for the D.C. Circuit. This blog has been closely following the litigation, previously summarizing Appellants’ opening brief, as well as FDA’s brief and appellants reply brief. A list of all briefs can be found at the end of this blog post.

The Commissioner’s June 18 remarks, acknowledging the benefits of e-cigarettes as tools for adult smoking cessation, follow previous statements by Commissioner Gottlieb, the agency itself, the American Cancer Society (ACS), and an FDA-commissioned report acknowledging the lower risk associated with e-cigarettes in comparison to combustible tobacco and e-cigarettes’ potential public health benefits. As set forth at the outset of appellants’ final reply brief in the Deeming Rule appeal, those statements and findings include:

  • FDA stated numerous times during the rulemaking that vapor products are less harmful than traditional cigarettes.[3]
  • In announcing its Comprehensive Plan for regulating tobacco and nicotine, FDA recognized it must “strik[e] an appropriate balance between regulation and encouraging development of innovative tobacco products that may be less dangerous than cigarettes.”[4]
  • FDA Commissioner Gottlieb and Mitch Zeller, Director of FDA’s Center for Tobacco Products, wrote in the New England Journal of Medicine that vapor products, when combined with measures to reduce nicotine levels in cigarettes, “represent[] a promising foundation for a comprehensive approach to tobacco harm reduction.”[5]
  • One of FDA’s supporting amici, the ACS, recently determined, “[b]ased on currently available evidence, using current generation e-cigarettes is less harmful than smoking cigarettes,” and concluded “switching to the exclusive use of e-cigarettes is preferable to continuing to smoke combustible products.”[6]
  • A recent NAS report commissioned by FDA, which the Commissioner mentioned in his June 18 remarks, confirms vaping is less risky than smoking.  The report, which is based on a review of over 800 articles, found: (i) conclusive evidence that completely substituting vaping with smoking reduces exposure to numerous toxicants and carcinogens; (ii) current evidence shows vapor products are less harmful than cigarettes; (iii) substituting vaping for smoking significantly reduces levels of biomarkers of exposure to toxicants; and (iv) vaping exclusively might be useful as a cessation aid in smokers.”[7]

Despite these recent statements, FDA continues to take a hard line in the pending appeal, where the agency argues: (1) the Modified Risk Tobacco Product (MRTP) provision in Section 911 of the TCA does not violate the First Amendment of the U.S. Constitution; (2) the free sample ban is a “price regulation,” so it is not subject to First Amendment protections; and (3) the Premarket Tobacco Application (PMTA) process was statutorily required and did not authorize nor require FDA to modify those requirements for vapor products. Each of these positions, as explained by appellants in the appeal, work against promoting continuum of risk and achieving risk reduction:

  1. Modified Risk Tobacco Product (MRTP) Claims: FDA’s defense of the MRTP provision will ultimately prevent vapor companies from making truthful statements and conveying information that would help adult consumers make informed decisions regarding vaping. As set out in appellants’ briefs, the incredibly onerous and expensive MRTP authorization process, which no company has been able to achieve yet, is ultimately a restriction on the First Amendment rights of consumers in the marketplace to obtain product-related information so they can make educated decisions.
  2. Free Sample Ban: Similarly, FDA downplays free samples as a mere “price regulation,” which are not subject to First Amendment challenge. To the contrary, and as demonstrated by appellants in their briefs, free samples allow manufacturers to pass on product information that adult consumers demand when contemplating a switch from more harmful cigarettes, and are thus protected under the First Amendment.
  3. The Premarket Tobacco Application (PMTA): FDA’s one-size-fits-all PMTA process for vapor products, which involves satisfying all pre-market review requirements for less risky vapor products, will also force the vast majority of vapor companies and less harmful vapor products out of the market absent some tailoring of certain requirements.

Oral arguments in the Deeming Rule appeal have been scheduled for September 11, 2018 before the U.S. Court of Appeals for the D.C. Circuit.

Links to all appeal briefs:

  • February 12, 2018: Appellants Nicopure and Right to be Smoke-Free file opening brief
  • February 20, 2018: Amicus briefs in support of appellants filed by: Washington Legal Foundation, NJOY, State of Iowa and CASAA
  • May 2, 2018: Appellee FDA’s brief filed
  • May 9, 2018: Amicus briefs in support of FDA filed by: Public Citizen, Yale Law School Scholars, Public Health Law Center, and various public health groups (American Academy of Pediatrics, American Cancer Society Cancer Action Network, American Heart Association, American Lung Association, American Thoracic Society, Campaign for Tobacco-Free Kids, and Truth Initiative)
  • May 16, 2018: Appellants Nicopure and Right to be Smoke-Free file reply brief
  • June 5, 2018: Appellee FDA files a final copy of its opening brief with updated citations to the administrative record
  • June 6, 2018: Appellants Nicopure and Right to Smoke-Free file final copies of their opening and reply briefs with updated citations to the administrative record

The Right to be Smoke-Free Coalition and Nicopure Labs are represented in the appeal by Keller and Heckman LLP Partners Eric Gotting and Azim Chowdhury. For more information on the lawsuit and to contribute to the appeal efforts, visit www.r2bsmokefree.org.

[1] Gottlieb, S. (2018, June 18). FDA’s Nicotine and Tobacco Regulation and the Key Role of Regulatory Science. Speech presented at Tobacco Regulatory Science Program Meeting, White Oak, MD. Available at https://www.fda.gov/NewsEvents/Speeches/ucm611033.htm.

[2] National Academies of Science, Engineering and Medicine: Committee on the Review of the Health Effects of Electronic Nicotine Delivery Systems, The Public Health Consequences of E-Cigarettes (eds. Kathleen Stratton et al., 2018), available at https://tinyurl.com/ya4w37kb.

[3] Opening brief of appellants at 7. Available at Gottlieb, S. (2018, June 18). FDA’s Nicotine and Tobacco Regulation and the Key Role of Regulatory Science. Speech presented at Tobacco Regulatory Science Program Meeting, White Oak, MD. Retrieved from https://www.fda.gov/NewsEvents/Speeches/ucm611033.htm.

[4] FDA News Release, FDA Announces Comprehensive Regulatory Plan to Shift Trajectory of Tobacco-Related Disease, Death (July 28, 2017), https://tinyurl.com/y7bybf6c.

[5] Scott Gottlieb, et al., Perspective: A Nicotine-Focused Framework for Public Health, New Eng. J. Med. (Sept. 21, 2017), https://tinyurl.com/yatrpq68.

[6] ACS, Position Statement on Electronic Cigarettes (Feb. 15, 2018),  https://tinyurl.com/ybadn9cl; see also a summary of ACS’s most recent position statement in a previous blog post, available at https://www.thecontinuumofrisk.com/2018/06/american-cancer-society-acknowledges-reduced-harm-electronic-nicotine-delivery-systems-warns-dangers-misleading-consumers/.

[7] NAS, PUBLIC HEALTH CONSEQUENCES OF E-CIGARETTES, at S-9, 18-2, 18-13, 1823, https://tinyurl.com/ycxlymgf.

Photo of Azim ChowdhuryPhoto of Benjamin Wolf
due_dates

 

 

Tobacco product manufacturing establishments in the United States must register with the Food and Drug Administration (FDA) immediately upon beginning manufacturing operations (e.g., the manufacture, preparation, compounding, or processing of a tobacco product).  As part of the registration process, establishment operators must submit a detailed list of products manufactured at the establishment, along with copies of all labeling (see our full summary of the registration requirement here).  This registration must be renewed annually before midnight on December 31 (Eastern time) every year, and product lists must be updated bi-annually: by midnight June 30 and December 31 every year.

This means that operators of manufacturing establishments of newly deemed products (e.g., vapor, cigars, hookah, etc.) on the market as of August 8, 2016 that have made changes to their product offerings must update their product lists with FDA by tomorrow, June 30, 2018, or as soon as possible to avoid FDA enforcement (considering the likelihood that FURLS may crash, the sooner you start this process, the better). Specific examples of changes that need to be updated (in FURLS, if you used that system to register online) include (1) discontinuing products on your product list that you are no longer actively manufacturing, (2) adding new products that are now being manufactured (e.g., co-packers now manufacturing pre-August 8, 2016 products that were not on the co-packers’ initial product list), (3) adding a new manufacturing location for products already listed by another establishment, or (4) labeling changes (including rebranding) of existing products.

Note that if you are planning to update your labels to comply with FDA’s nicotine addiction warning and other labeling requirements (that go into effect on August 10, 2018) after June 30, you have until December 31, 2018 to update your product listing with the revised labels.

If you have any questions about Registration and Product Listing or any of the other Tobacco and Control Act requirements, contact Azim Chowdhury (202.434.4230, chowdhury@khlaw.com) or Ben Wolf (202.434.4103, wolf@khlaw.com). For more information on our Tobacco and E-vapor Practice in general, visit www.khlaw.com/evapor. Follow Keller and Heckman Tobacco and E-Vapor Partner Azim Chowdhury on Twitter.

Photo of Azim ChowdhuryPhoto of Benjamin Wolf
Warning_Icon

On May 1, 2018 the Food and Drug Administration (FDA) and the Federal Trade Commission (FTC) issued 13 warning letters to companies that they claim misleadingly labeled or advertised nicotine-containing e-liquids as kid-friendly food products such as juice boxes, candies, and cookies.  Warning letters were issued to manufacturers, distributors, and retailers of eight products.

All of the warning letters included allegations of misbranding under Sections 903(a)(1) and 903(a)(7) of the Food, Drug, and Cosmetic Act (FDCA) – both of which relate to labeling or advertising that is misleading or untrue in any particular – and Section 5 of the FTC Act for unfair or deceptive advertising.  Both the FDA and FTC alleged violations are based on the risk of confusion, especially by children, between the e-liquid products and foods that are marketed toward, or appealing to, children.

In some of the warning letters issued to distributors and retailers, FDA added allegations that the e-liquids were sold to minors in violation of Section 903(a)(7)(B) of the FDCA.  In one instance, FDA alleged that the company violated Section 201(rr)(4) of the FDCA – which bars the marketing of a tobacco product “in combination with any other article or product regulated” by FDA – because a combination pack of candy and e-liquid were offered together.  The warning letters also highlighted the potential harm that could result if nicotine-containing e-liquids are ingested by children, although the number of poison center calls regarding e-liquids has fallen dramatically since the Children’s Nicotine Poisoning Prevention Act went into effect in 2016.  That law requires “liquid nicotine containers” use child-resistant packaging just like prescription drugs, some over-the-counter (OTC) drugs, and other potentially hazardous products found in the home, pursuant to the Poison Packaging Prevention Act.

The issuance of the 13 warning letters comes about a week after FDA Commissioner Gottlieb announced that FDA (1) recently issued warning letters to 40 retailers for underage sales of JUUL products, (2) was in the midst of a “new blitz of retail establishments targeting youth sale violations”, (3) is seeking to end sale of JUUL products to minors, and (4) would examine the youth appeal of JUUL products.  FDA also requested JUUL Labs submit information regarding, among other things, its marketing, research studies, and how certain product features might appeal to different age groups.  While some have argued that the panic over JUUL, which appears to be based on anecdotal evidence and media reports, could actually adversely impact the public health, there is no doubt that FDA is committed to cracking down on underage sales and reducing youth appeal of tobacco products, including vapor products.

In light of the warning letters issued on April 24 and May 1 and the Agency’s interest in tobacco product flavors, it appears that FDA may be setting its sights on the elimination of flavored e-liquids, which have also been shown to help adult smokers transition to less harmful vaping alternatives, as part of its effort to curb the use of vapor products by youth. Of note, a recent study evaluating how young people use vapor products in the United Kingdom, where the products are actively promoted by the government as less harmful than cigarettes and as a way to quit smoking, found that most product experimentation does not turn into regular use, and that regular use of vapor products in young people who have never smoked remains very low.

Industry and other stakeholders interested in maintaining the availability in the U.S. of flavored e-liquids have until June 19, 2018 to submit comments to FDA’s Advanced Notice of Proposed Rulemaking.

Photo of Azim ChowdhuryPhoto of Daniel Rubenstein
FDA is Coming webinar

At yesterday’s meeting with the U.S. House Subcommittee on Agriculture and Rural Development to discuss FDA’s Fiscal Year 2019 budget, Food and Drug Administration (FDA) Commissioner Scott Gottlieb discussed the Agency’s regulation of the tobacco industry and noted, among other things, that when all the requirements for the newly deemed products, including vapor products, went into effect last year, FDA now has authority to inspect and impose GMP standards and enforce age restrictions.  Gottlieb indicated that FDA would be “stepping into this fight in a vigorous way in the coming weeks.”

Being prepared for an FDA inspection is critical to maintaining compliance.  Just a few weeks ago, FDA’s recently-issued Request for Proposal (RFP), Vape Inspection Services (FDA-RFP-18-1190619), was extended on March 22, 2018 to allow for additional time for FDA to receive, review and consider responses from government contractors submitting bids to conduct inspections of establishments engaged in the retail sale of FDA-regulated tobacco products.

The RFP provides valuable insight into the Agency’s current thinking with regard to the scope of inspections that are expected to begin shortly, as mandated by the Tobacco Control Act.

Specifically, the RFP indicates that the contractor(s) shall, in the course of a facility inspection:

  • Complete and provide FDA with a signed Form FDA 482 (“Notice of Inspection”);
  • Complete an inspection form, detailing:
    • Administrative information;
    • The scope of the facility’s business (e.g., manufacturing, retail, import/export of products);
    • A list of potential violations of the Federal Food, Drug, and Cosmetic Act; and
  • Be prepared to testify on behalf of FDA in any regulatory or judicial proceeding.

The RFP focuses extensively on the type of evidence collection and storage permissible under the Agency’s guidelines – including the collection of photographic and physical evidence.  The RFP further requires that the contractor complete required Agency training regarding the permissibility of collecting reports, data, documents, and photos (including limitations on Confidential Business Information (CBI), sales data, and personnel data).

The RFP describes the scheduling of inspections on a continuing, quarterly basis, in accordance with designated quotas.  The program allocates funding for one full-time program manager, approximately 10 program coordinators, and 20 inspectors (based on 2,080 annual hours per full-time equivalent).

Keller and Heckman continues to monitor developments relating to FDA’s forthcoming inspections of tobacco and vapor manufacturing establishments, and, to help companies prepare, recently launched the Audit and Inspection Program (AIP).  The AIP provides establishments with an opportunity to conduct advance, client-confidential, independent auditing to identify and remedy any deficiencies.  In addition, the AIP provides establishments with training regarding FDA’s inspection authority, the permissibility of Agency collection of business information, and optional environmental and occupational health and safety components.  For additional details on the AIP Program and to register, click here.

On May 2, 2018 (3:00 PM ET), attorneys Azim Chowdhury and Daniel Rubenstein will be participating in a free webinar hosted by the Smoke-Free Alternatives Trade Association (SFATA), “The FDA is Coming – Are You Ready” and will be discussing Keller and Heckman’s AIP and how manufacturers and retailers can prepare for an FDA inspection. Register for the webinar here.

Photo of Azim ChowdhuryPhoto of Benjamin Wolf
ingredient listing (002)2

The vapor device industry has been requesting FDA for years to exempt devices from the Tobacco Control Act Section 904(a)(1) ingredient listing requirement, respectfully arguing, among other things, that the information required for non-consumable hardware products and components provides no meaningful information to FDA that would help it protect the public health.[1]  On April 13, 2018, just 25 days before the reporting deadline for large manufacturers of deemed tobacco products, FDA published a revised Guidance for Industry: Listing of Ingredients in Tobacco Products.  FDA now intends to enforce the ingredient listing requirement only with respect to those tobacco product components or parts that are made or derived from tobacco, or contain ingredients that are burned, aerosolized or ingested (i.e., consumed) during use.  Although the revised guidance is late – and comes after many companies have spent considerable time and funds to comply with the reporting requirement – it is welcome news for the industry.

The ingredient listing deadlines for the applicable components and parts of deemed finished tobacco products[2], however, have not changed – large manufacturers of such products still have only until May 8, 2018, while small-scale manufacturers[3] have until November 8, 2018.

Manufacturers of vapor devices and finished deemed tobacco product components and parts should keep in mind that FDA’s decision to exempt such products from ingredient listing does not change the fact that these products are still subject to FDA’s premarket authorization requirements.  It remains the case, for example, that any new vapor device intended for introduction into the U.S. market after August 8, 2016 requires Premarket Tobacco Product Application (PMTA) authorization (which requires ingredient information, along with a significant amount of additional data) before it can be marketed, and any devices on the market on August 8, 2016 have until August 8, 2022 before PMTAs are due, and can remain on the market after that date only if PMTAs for the products are accepted by FDA for review.

Components and Parts Subject to Ingredient Listing 

The revised guidance provides examples of “consumable” components and parts that still require ingredient listing including, but not limited to:

  • Cigar filler;
  • Cigar binder;
  • Cigar wrapper;
  • Pipe tobacco;
  • Waterpipe tobacco;
  • E-liquids;
  • Cigarette tobacco;
  • Cigarette paper;
  • Smokeless tobacco;
  • Roll-your-own (RYO) tobacco;
  • RYO rolling paper;
  • RYO tube; and
  • Cigarette filter that contains any ingredient that burns, aerosolizes, or is ingested during use (e.g., cigarette filter with menthol because the menthol will aerosolize during cigarette smoking).

Ingredients of tobacco product components and parts that are not made or derived from tobacco or consumed during use, e.g., pipes, hookah apparatus, vapor devices, etc., need not be submitted to FDA.  Examples of components or parts for which FDA does not intend to enforce the ingredient listing submission requirement at this time include, but are not limited to:

  • Electrical components including, but not limited to, batteries, charging systems, circuit boards, wiring, and connectors;
  • System software;
  • Digital display, lights, and buttons to adjust settings;
  • Connection adapters;
  • Cartomizers;
  • Coils;
  • Wicks;
  • Tanks;
  • Mouthpieces;
  • Pipes;
  • Waterpipes;
  • Hoses;
  • Bowls;
  • Charcoal; and
  • Cigarette filter that does not contain any ingredient that is burned, aerosolized, or ingested during tobacco use.

Based on this, e-liquid manufacturers need only provide ingredient information on the liquid component of their products, not other non-consumable components such as bottles, drippers and packaging.  FDA expects to receive ingredient information for these non-consumable components and parts during its pre-market review of finished tobacco products (e.g., Premarket Tobacco Applications and Substantial Equivalence Reports).

Single Submissions for Multiple Products

With respect to consumable components and parts, the revised guidance also now makes clear that there are a number of situations where ingredients for multiple products may be listed together under a single submission, provided all of the different brands/subbrands and product sizes for the associated products in the submission are identified.  Examples of situations allowing a single ingredient listing for multiple products are provided in the guidance as follows:

  • Identical per weight composition of ingredients for tobacco products sold under multiple brands/subbrands:
    • Pipe tobacco with identical per weight composition of ingredients sold under 30 brands/subbrands;
    • E-liquids with identical per weight composition of ingredients sold under 200 brands/subbrands; and
    • Waterpipe (shisha) tobacco with identical per weight composition of ingredients sold under 15 brands/subbrands.
  • Identical per weight composition of ingredients for tobacco products sold in multiple product sizes:
    • E-liquid with identical per weight composition of ingredients sold in volumes of 30mL, 60mL, 90mL or sold in a range of product sizes (e.g., 20mL-100mL);
    • Pipe tobacco with identical per weight composition of ingredients sold in product sizes of 5g, 10g, 50g;
    • Waterpipe (shisha) tobacco with identical per weight composition of ingredients sold in product sizes of 100g, 200g, 500g; and
    • Pouched snus with identical per weight composition of ingredients sold in a can of 12 snus sachets or a can of 15 snus sachets.

For open-system e-liquids more specifically, the revised guidance indicates that manufacturers can satisfy the ingredient listing requirement by providing one listing that corresponds to multiple products if the manufacturer sells e-liquids that (1) are identical in chemical composition to one another or (2) are identical in chemical composition to one another except the quantities of propylene glycol (PG), vegetable glycerin (VG), and/or nicotine differ.8 For example:

  • E-liquids with identical nicotine concentrations (e.g., 0.5 mg/ml nicotine) but varying PG/VG ratios (e.g., 20/80, 50/50, 80/20) and all other ingredients having identical per weight composition.
  • E-liquids with identical PG/VG ratio (e.g., 50/50) but different nicotine concentrations (e.g., 0.5, 1.0 1.5 mg/ml) and all other ingredients having identical per weight composition.
  • E-liquids with varying PG/VG ratios (e.g., 20/80, 50/50, 80/20) and different nicotine concentrations (e.g., 0.5, 1, 2 mg/mL) with all other ingredients having identical per weight composition.

However, changes to relative ratios of ingredients or to the quality or type of an ingredient will require separate submissions.  For e-liquids, the revised guidance provides several examples of when separate submissions to correspond to each brand/subbrand of a product are required:

  • E-liquids that have identical PG/VG chemical structure, but the nicotine chemical structure is different (e.g., moving from free nicotine to nicotine salt), even with identical per weight composition of all other ingredients.
  • E-liquids that have identical PG/VG chemical structure and identical nicotine chemical structure but where the per weight composition of all other ingredients is different in any way (e.g., increased amount of cherry flavor #1 added when all other ingredient ratios stay the same).
  • E-liquids where the grade of the PG/VG is different in any way (e.g., percent purity changes).

For more detailed background on the ingredient listing information needed and submission process, see here.

*          *          *          *

If you need assistance with ingredient listing or for more information regarding other regulatory obligations facing tobacco product manufacturers, distributors, importers, or retailers, please contact Azim Chowdhury at chowdhury@khlaw.com or 202-434-4230.

 

_________________________________________________________

[1]           See e.g., comment to the FDA Ingredient Listing Guidance document submitted by Shenzhen E-Vapor Industry Association (SEVIA) in May 2017, available at https://www.regulations.gov/document?D=FDA-2009-D-0524-0034.

[2]              The term “finished tobacco product” means a tobacco product, including all components and parts, sealed in final packaging intended for consumer use. Components and parts that are sold separately from other tobacco products are finished tobacco products if they are sold in final packaging intended for consumer use.

[3]           The term small-scale tobacco product manufacturer means a manufacturer of any regulated tobacco product that employs 150 or fewer full-time equivalent employees and has annual total revenues of $5 million or less. FDA considers a manufacturer to include each entity that it controls, is controlled by, or is under common control with.

Photo of Azim ChowdhuryPhoto of Benjamin Wolf
eSubmitter logo

Per Section 904(a)(1) of the Tobacco Control Act (TCA), one of the core requirements for manufacturers, including manufacturers of deemed tobacco products such as e-liquid, vapor devices, cigars and hookah, is the requirement to submit to the Food and Drug Administration (FDA) a list of all ingredients that are “added by the manufacturer to the tobacco, paper, filter, or other part of each tobacco product….”  Unlike the Registration and Product Listing requirement, which only applies to domestic U.S. manufacturing establishments, ingredient listing is required for all finished deemed tobacco products marketed in the United States, regardless of where the product was produced.[1]

Upcoming Deadlines

When the Deeming Rule became effective on August 8, 2016, FDA’s initial compliance policy required large deemed tobacco product manufacturers (i.e., manufacturers earning over $5M in annual revenues or who have over 150 full-time employees) to submit ingredient lists to FDA for all of their finished products by February 8, 2017; small-scale manufacturers had until August 8, 2017.  Over the course of 2017 these deadlines were extended several times for various reasons; now, large-scale manufacturers have until May 8, 2018 and small-scale manufacturers have until November 8, 2018.[2]  While it is always possible FDA could further push the deadlines back, we think it is unlikely to do so for ingredient listing.

Information Required

The ingredient listing process can be complicated and time consuming, particularly for manufacturers of e-liquids and vapor devices, for whom FDA has provided little specific guidance, and that may have hundreds of SKUs or more.  Broadly speaking, ingredient listing reports require the following:

  • Contact information for the manufacturer/submitter and U.S. agent;
  • A product list (similar to the product list U.S. manufacturers had to prepare for establishment registration);
  • For each product, a list of “components”;
  • For each component, a list of “ingredients” (e.g., single chemical substances and complex purchased ingredients); and
  • Specific information regarding each ingredient (e.g., quantity, ingredient number, SKU number, supplier information for complex purchased ingredients, etc.).

For more detailed background on the information needed to prepare ingredient listing reports, see our previous postings.

Submission Process

Although companies can submit ingredient listing reports manually to the CTP Document Control Center using the paper Form 3742, FDA encourages electronic submission through the CTP Portal.  This should not be confused with the separate FDA Unified Registration and Listing System (FURLS), which is only for U.S. Establishment Registration and Product Listing.  Obtaining CTP Portal access typically takes a few weeks, so you should apply for an account as soon as possible if you do not yet have one.

Only files that are packaged using FDA’s eSubmitter software can be submitted through the CTP Portal (download eSubmitter here). The eSubmitter tool does not transmit data over the Internet, but resides locally on your computer along with any output files, allowing you to work on a submission offline, save, and continue later.  Once a submission is complete, eSubmitter “packages” (i.e., compiles) the submission into a format that can be securely submitted through the CTP Portal.

Preparing Reports in eSubmitter

The eSubmitter tool contains templates for various FDA required submissions, including health documents and ingredient listing reports, among other things.

Of note, on March 5, 2018, FDA Center for Tobacco Products published a new set of instructions which provides a step-by-step guide on using eSubmitter to list ingredients in tobacco products.  At the same time, eSubmitter was updated to include two new options for preparing ingredient listing reports, which are discussed in the new instructions.

The first new option (“Option (c)”) allows for the use of a single spreadsheet to input ingredient information for all of a company’s products, rather than using multiple spreadsheets (Option (b)). The Option (c) spreadsheets come in both e-liquid specific (download here) and any tobacco templates (download here).

The second new option to attach your own spreadsheet (“Option (d)”) permits manufacturers to create and submit their own ingredient listing files in any format they wish.  While FDA requests that a spreadsheet be generated, eSubmitter will support the submission of a number of file types: .pdf, .jpg, .gif, .tif, .avi, .wmv, .xpt, .xml, .sgml, .mol, .xls, .xlsx, .csv or .txt.

New eSubmitter Spreadsheets

The new Option (c) spreadsheets require all the same information as before, but has several unique differences compared to the original, multiple-spreadsheet method.  For example, now combinations of flavors and other additives can be saved as “master recipes” that can be added to any e-liquid formulations that contain it, along with levels of nicotine, PG and VG, making it easier to list ingredients for e-liquids that differ only in concentration of nicotine or other ingredients.  In addition, the Option (c) spreadsheets simplifiy the process of inputting component information, making it easier to, for example, “link” different bottle sizes to a formulation without re-inputting all the ingredient information. The new spreadsheet is also less cumbersome to complete and, so far, appears not to have as many bugs that often made importing the original tobacco ingredient spreadsheets into eSubmitter an onerous process (see our May 2017 webinar here which demonstrates how to use the original, multiple-spreadsheet method in eSubmitter).

E-liquid manufacturers should also keep in mind that the Option (c) e-liquid spreadsheet can only be used for the e-liquid component of a product; information regarding the other components of the finished product (e.g., bottle, cap/dripper, label, packaging, etc.) will need to be entered separately (either manually in eSubmitter or with a separate spreadsheet).

Manufacturers of vapor devices and hardware components, many of whom have argued that the current “ingredient” listing requirement and process does not make sense for such products[3], will also need to report ingredients to FDA either manually in eSubmitter, using the original multiple spreadsheet method, the Option (c) spreadsheet for products other than e-liquids, or by developing and submitting their own files as attachments using Option (d).

*          *          *          *

While the new eSubmitter spreadsheet options could make submitting ingredients to FDA easier for some manufacturers, the process still presents a significant time commitment.  Companies should not hesitate to start the process sooner rather than later.

If you need assistance with ingredient listing or for more information regarding other regulatory obligations facing deemed tobacco product manufacturers, distributors, importers, or retailers, please contact Azim Chowdhury at chowdhury@khlaw.com or 202-434-4230.

 

______________________________________________

[1]              A finished tobacco product is defined in the Deeming Rule and FDA guidance as “a tobacco product, including all components and parts, sealed in final packaging intended for consumer use. See FDA, Guidance for Industry (Revised)*: Listing of Tobacco Products, pg. 5 (Nov. 2017).

[2]           See FDA, Guidance for Industry (Revised)*: Extension of Certain Tobacco Product Compliance Deadlines Related to the Final Deeming Rule (Nov. 2017).

[3]           See e.g., comment to the FDA Ingredient Listing Guidance document submitted by Shenzhen E-Vapor Industry Association (SEVIA) in May 2017, available at https://www.regulations.gov/document?D=FDA-2009-D-0524-0034.

Photo of Azim Chowdhury

The 2nd Annual Keller and Heckman E-Vapor and Tobacco Law Symposium held on February 6-7, 2018 in Irvine, California was a huge success with over 100 attendees from all over the country and world.  Check out the highlight video below.  We are in the process of securing a location for next year’s symposium and would like your feedback on potential locations (Irvine, Miami, Dallas or Washington, DC).  Please take a moment to complete the brief survey here.

Take a look at highlights from this year’s conference:

Click on the link below to receive updates on the 2019 E-Vapor and Tobacco Law Symposium.

For questions or additional information,  please contact:

Sara A. Woldai

Manager, Marketing Meetings and Events

Keller and Heckman LLP

woldai@khlaw.com

Connect with us on: 

 

Photo of Azim ChowdhuryPhoto of JC WalkerPhoto of Manesh RathPhoto of Daniel RubensteinPhoto of Benjamin Wolf

February 26, 2018 – Keller and Heckman LLP is pleased to announce the introduction of its Audit and Inspection Program (AIP) for Tobacco and Vapor Product Manufacturing Establishments.

The AIP was developed in response to the Food and Drug Administration’s (FDA) inspection authority under the Food, Drug, and Cosmetic Act (FDCA or the Act), as amended by the Tobacco Control Act, which provides that FDA shall inspect each factory, warehouse, establishment, or vehicle in which tobacco products, including deemed tobacco products, are manufactured, processed, packed, or stored.  Pursuant to Sections 704 and 905 of the Act, FDA is directed to inspect every establishment at least once every two years.

Audit and Inspection Program

Keller and Heckman’s experienced team of attorneys and scientists will provide a comprehensive, on-site training and facility auditing program designed to help your company adequately prepare for an FDA inspection.  As part of the AIP, companies can expect:

  • An introductory presentation and memorandum detailing FDA’s inspection authority, what to expect during an inspection, and how to adequately prepare for – and respond to – an FDA inspection;
  • A full facility audit, consisting of a complete mock-inspection; and
  • A written post-inspection report detailing the overall readiness of the facility for an FDA inspection, including a list of specific recommendations and opportunities for improvement*

Keller and Heckman’s AIP program is designed to provide companies that are involved in any aspect of the tobacco or vapor product supply chain with confidence that their facilities are operating in accordance with FDA requirements.  The AIP will consider a broad range of inspection activities, including: recordkeeping, product labeling, product samples, requests for video/audio/photographic recordings, standard operating procedures, cleanliness and sanitation, inventory control, and personnel interviews.

Supplemental Environmental and OSHA Compliance Components

In addition to FDA compliance, the AIP offers companies the option to include supplemental compliance training and auditing focusing on environmental and occupational health and safety regulations and requirements – efficiently leveraging the FDA mock inspection and full facility audit.

  • Environmental: The AIP program will offer companies the opportunity to add an additional training and compliance component focusing on federal and state environmental and waste management regulations. Specifically, nicotine-bearing products may be subject to regulation under the Federal Resource Conservation and Recovery Act (RCRA) when disposed.  State regulations governing dangerous or industrial wastes also could apply.  This component will provide an overview of how nicotine in tobacco-based products are regulated differently than when found in e-cigarettes and other vaping products, and will provide valuable information regarding companies’ obligations in responding to these additional requirements.  For more information on environmental requirements, see here.
  • Occupational Health and Safety: Participants in the AIP program will also have the opportunity to add an additional training and compliance component focusing on federal and state Occupational Safety and Health laws. OSHA recordkeeping requirements apply to all employers, except very small businesses.  Most other OSHA standards apply to all employers, regardless of size.  This component will provide companies with a review of existing policies and practices, and will recommend specific actions designed to bring companies into compliance with regulations in areas relevant to the industry, including: personal protective equipment, emergency plans, fire protection, and hazard communication (g., labeling and safety data sheets).

Pre-Registration

Pre-registration for the AIP is available immediately by filling out the form available here:

Tobacco and Vapor Product Manufacturing Establishment Audit and Mock Inspection Program Pre-Registration Form

The completed pre-registration form can be E-mailed to chowdhury@khlaw.com, faxed to (202) 434-4646, or mailed to:

Keller and Heckman LLP
Attn: Azim Chowdhury
1001 G Street NW, Suite 500 West
Washington, D.C. 20001

Upon receipt of your pre-registration form, Keller and Heckman will provide your company with a formal written proposal and cost-estimate to conduct on-site training and mock inspection at your facility.  Scheduling is generally available on a first-come, first-serve basis.

*The written post-inspection report is covered by any existing attorney-client relationship between Keller and Heckman and the Company, and is generally not subject to discovery.  The recommendations set forth in the post-inspection report are for informational purposes only, and do not constitute any warranties or guarantees regarding the outcome of an actual FDA, EPA or OSHA inspection.  Keller and Heckman’s attorneys remain available and look forward to the opportunity to assist with any post-inspection activities or questions following completion of the written report.